Need help?Do you have a question about the Raymarine HSB Chartplotter and is the answer not in the manual?
Introduces the handbook's organization and content.
Describes general features and specifications of the unit.
Details the capabilities and components of the display unit.
Lists the primary operational capabilities of the chartplotter.
Explains the different display modes available.
Describes the chartplotter screen interface and controls.
Explains how to customize the chart display settings.
Details the chartplotter's physical and on-screen controls.
Details the functions of the unit's fixed keys.
Explains the dynamic function keys below the screen.
Introduces the chapter on starting and adjusting the unit.
Instructions for powering the unit on and off.
How to adjust screen and key backlighting and contrast.
Explains how to use the simulator mode for practice.
Information on inserting and using C-MAP chart cards.
How to manage screen display modes and views.
Methods for panning and navigating the chart display.
How to set display options like data boxes and grids.
Provides practical examples of common chartplotter operations.
Introduces chapter on navigation using chart functions.
How to manage waypoints, including placing, editing, and deleting.
Step-by-step guide to adding waypoints to the chart.
How to choose waypoints for editing or navigation.
How to modify waypoint name, symbol, and position.
How to create, save, and manage navigation routes.
Step-by-step instructions for building new routes.
How to store and name a created route.
How to view details of route legs and waypoints.
How to modify existing routes by adding/removing waypoints.
How to navigate along routes or to specific points.
How to send and receive waypoint/route data.
How to record, save, and display vessel track history.
How to save, name, erase, and show recorded tracks.
Introduces additional chart functions.
How to use the VRM/EBL feature for measurements.
How to set up and manage system alarms and timers.
How to use the dedicated MOB function for safety.
How to check GPS status and reacquire satellite fixes.
How to log and review vessel course data.
Introduces chapter on system setup and preferences.
How to display and modify system and chart parameters.
Details system settings like data boxes, units, and language.
How to configure chart-specific display settings.
How to set chart display to North Up, Course Up, or Head Up.
Introduces the chapter on installing the chartplotter system.
Recommendations for proper installation to ensure EMC performance.
Key considerations before commencing the installation process.
Instructions for checking system components after unpacking.
Information on choosing suitable locations for the display unit.
How the chartplotter connects with other marine electronics.
Guidelines for routing and protecting system cables.
Instructions for physically installing the display unit.
Details on connecting the chartplotter to power and other systems.
How to verify the installation and perform the first power-up.
Information on routine upkeep and safety precautions.
How to reset system parameters, including factory reset.
Troubleshooting common issues and contacting support.
Lists the overall technical specifications of the HSB Series displays.
Details the specific functions and capabilities of the chartplotter.
Explains how the unit interfaces with other systems.
To Next Page
General