Chapter 5: Setting Up the Chartplotter 83
6. Press ENTER, MENU or CLEAR to clear the soft keys and return to
the normal display.
You can return all the settings to their original factory settings, if required,
by performing a factory reset as described in Chapter 7.
5.3 System Parameters
The following table lists the System menus and their options, shows the
factory default setting, and provides a space for you to make a note of
your new default setting. Each parameter is described in the following
subsections.
Menu Options Factory New
Default Default
DATA BOXES
POSITION OFF, LAT/LONG, TDs OFF
SPEED OFF or ON OFF
DEPTH OFF or ON OFF
COG OFF or ON OFF
SOG OFF or ON OFF
TIME OFF or ON OFF
DATE OFF or ON OFF
WIND OFF, APP, TRUE or BOTH OFF
WAYPOINT OFF, LAT/LONG, or
RNG,BRG,TTG OFF
XTE OFF or ON OFF
HEADING OFF or ON OFF
LOG/TRIP OFF or ON OFF
PILOT OFF or ON OFF
VMG OFF, WIND, WPT or BOTH OFF
TEMPERATURE OFF or ON OFF
TIDE SET/DRIFT OFF or ON OFF
BEARING MODE MAGNETIC TRUE
TRUE
CURSOR REFERENCE MAG/TRUE RELATIVE
RELATIVE
CURSOR READOUT OFF RNG/BRG
LAT/LONG
RNG/BRG
BOTH
DAY/NIGHT DAY/NIGHT DAY
HELP OFF/ON ON
SOFT KEYS OFF/ON ON
KEY BEEP OFF/ON ON
System
Parameters
To Next Page
Loading...
Need help?
General