Raymarine GPM400 - Page 24

G-Series Reference Manual 24
2. Change the setting:
3. Press OK to accept your changes, or CANCEL to go back to
the previous screen.
Dialog boxes
Dialog boxes are where you edit or enter data into the system.
They appear automatically at appropriate points. For example,
when you edit a list of waypoints, a dialog box appears for you to
enter or change waypoint names.
To enter data into a dialog box
1. Select the appropriate field.
2. Enter the data. Press OK to save the changes.
3. Repeat Steps 1 and 2 if necessary.
You can enter character text in upper- or lower-case but the system
is not case sensitive: it considers ‘WAYPOINT 1’ to be the same as
‘Waypoint 1’.
To use special or accented characters, turn on the Extended Char-
acter Set in the System Setup Menu (see
page 192).
D9559-1
Cartography Setup Menu
Highlight or change value
to new setting, using:
Trackpad
(up/down)
Rotary
control
or
Chart Display Detailed
Chart Grid On
Chart Text On
Chart Boundary ON
Spot Soundings ON
Safety Contour 66ft
Depth Contour ALL
Nav. Marks ON
OFF
7ft
10ft
16ft
20ft
33ft
66ft
D9560-1
Highlight field to be edited
e.g. waypoint
e.g.
EDIT NAME
Name
Symbol
Group
My Waypoints
Comment
Waypoint 1
D9561-1
e.g.
Name
Symbol
Group
My Waypoints
Comment
Waypoint 1
OK
To change character or selection, use:
,
To move to next character for editing, use:
or