81 Chapter 6: 3D Chart
View options
There are four view options to choose from: forward, aft, port and
starboard.
The current option is highlighted on the toolbar and displayed in the
status bar.
To select the view option
1. Press the PRESENTATION softkey.
2. Press the 3D VIEW OPTIONS softkey.
3. Toggle to your preferred view on the VIEW TO softkey.
4. Press OK.
Multiple views
You can display multiple 3D chart views by creating a page that
contains up to four windows. Each window could contain a view of:
• The same area from a different angle.
• Up to four different areas of the chart.
For information about setting up application windows, see Selecting
application windows on page 26.
6.8 Tuning the view
You can tune the 3D chart view using the following features:
• Exaggeration
• Declutter
AFTPRT
PRT ROTATE 106
o
T2.431nm
Eye point above and to starboard side
of boat, looking to port.
STB ROTATE 280
o
T2.431nm
AFT
D8726_1
STB
Eye point above and to port side of
boat, looking to starboard.
Port
Starboard
FWD ROTATE 195
o
T2.431nm
FWD
Default view.
Eye point above and behind the boat,
looking forward.
Pressing FIND SHIP resets to this view.
AFT ROTATE 011
o
T
Eye point above and in front of the boat,
looking behind it.
D8725_1
AFT
2.431nm
Forward
Aft
To Next Page
Loading...
