G-Series Reference Manual 36
4.1 Introducing waypoints
Waypoints are used to mark points to navigate to, for marking loca-
tions for fishing and diving, and as building-blocks in routes.
Waypoints can be created in any application and displayed on the
radar, chart and fishfinder windows. They can be viewed on all the
displays in a G-Series system.
Weather window
A waypoint can be placed when a Weather application window
is active but it will not be seen in the weather window.
Radar and 2D chart windows
A waypoint is represented on a radar or chart window when it is
inactive or active (i.e. you are navigating to it). The waypoint
symbol can be changed if required.
Wpt 2
Wpt 1
Active waypoint (boxed)
Active waypoint
Alternative waypoint symbols
Fishfinder window
When a waypoint is created it
is represented on fishfinder
windows, by a vertical line
labelled WPT. This symbology
cannot be changed.
WPT
WPT
WPT
WPT
3D chart and CDI windows
A waypoint is represented only when it is active i.e. you are
navigating to it.
D9496_1
To Next Page
Loading...
