G-Series Reference Manual 72
Panoramic photography
You can view panoramic photography of many ports and marinas.
The availability of photography is indicated by a camera symbol on
the chart, placed at the point the photograph was taken. The view-
point is indicated by the angle of the camera symbol. You can also
access photography from port services information.
To display panoramic photography
1. Highlight a port symbol.
2. Press OK.
3. In the Object Info popup, select Photos.
4. Select a numbered photograph from the list.
5. Press the VIEW PHOTO softkey.
or
1. Hotspot a camera symbol.
Business services and points of interest
The location of various business services and points of interest are
indicated by the following symbols:
Highlighting any of the above service symbols gives you the follow-
ing information about the business:
• Name
• Address
• Telephone number
• Type of business
You can switch off the business services symbols from the Cartog-
raphy Setup Menu, or by switching on chart declutter.
Aerial photography
Aerial photography is available for navigable waters up to three
miles inland. Beyond that, land is shown in green (on color charts)
and in gray (on black-and-white charts).
Business services/points of interest symbols
To Next Page
Loading...
