95 Chapter 8: The Fishfinder
8.6 Display mode settings
When a fishfinder preset is selected, its softkey label changes to ADJUST. Pressing this key allows you to configure the display mode
settings to suit your requirements. (Changes to the display mode are saved with the preset at power-off.)
Adjust F1 / F2
Select option
Zoom full/split
Full/split
1/2/3
Range (rotary)
Bottom shift (rotary)
Zoom factor x2/3/4, custom (R)
Zoom position auto/manual
Zoom
Bottom lock
A-Scope
To Next Page
Loading...
