Raymarine M81130 User Manual

Linear Drive
Installation Guide
Drives covered:
M81130 Type 1 Linear Drive 12 V
M81131 Type 2 (short) Linear Drive 12 V
M81132 Type 2 (long) Linear Drive 12 V
M81133 Type 2 (short) Linear Drive 24 V
M81134 Type 2 (long) Linear Drive 24 V
Document number: 81175-5
February 2007

Raymarine M81130 Specifications

General

Raymarine Part Number	M81130
Compatibility	Raymarine Autopilot Systems
Power Supply	12V DC
Operating Voltage	12V DC
Operating Temperature	-10°C to +55°C
Voltage	12V DC

Summary

Important Information

Safety Notices

Covers critical safety warnings regarding product installation and use as a navigation aid.

Product Specifications

Drive Specifications

Installation Instructions

Parts Required

Installation Steps

Outlines the sequential steps for installing the linear drive unit, referencing specific pages for guidance.

Mounting the Drive

Covers the essential steps for securely and correctly mounting the linear drive unit on the boat.

Drive Alignment

Describes the critical procedure for aligning the drive unit with the tiller arm and mounting surface.

Securing the Drive

Mounting Location

Securing Bolts

Connecting to the Steering System

Explains how to attach the drive's push rod to the boat's tiller arm or rudder quadrant.

Attaching the Rod End

Steering Check

Details the checks required after mounting to ensure proper movement and avoid damage.

Post Installation Checklist

Lists key checks to perform after the drive unit has been installed to ensure correct operation.

Connecting to the Course Computer

Electrical Safety

Cable Connections

Maintenance