Raymarine Ray230 - Menu Operation; Selecting the Menu Operation

3-52 Operations
3.5.30.1 Selecting the Menu Operation
To initiate the Menu function:
1. Press the FUNC key followed by the MENU key. Mn appears on the 7-
segment display and NAVSTAT is shown on the dot matrix display.
2. To scroll through these first level menu items, press the SQ UP/DOWN
key. The indicators alternate between NAVSTAT, DSC, and SETTING.
3. Select the desired operation and press the ENT key to enter that
particular menu item.
To exit the Menu operation, press and hold the CLR key for 3 seconds.
FUNC
+
MENU
FunctionFunction
FunctionFunction
Function
PurposePurpose
PurposePurpose
Purpose
1. NAVSTA Indicates the information input from NMEA or SeaTalk.
2. DSC To enter/modify various settings related to DSC.
3. SETTING To register the names of stations for Intercom mode, to set
the tone of the Fog Siren, to program the MMSI number, to
program the ATIS ID number (RAY230E only) and to set the
operation mode of ATIS (RAY230E only).
3.5.30 Menu Operation
The menu operation is used for making various settings and confirming
the current state. The operation is roughly divided in three functions as
follows: