3-75
Operations
3.5.30.5.4 Tri-Watch Set Up
This operation selects whether the Weather Channel is monitored during
Tri-Watch state in the US mode or the Multi-Call Channel is monitored
during Tri-Watch state in the INT mode.
Note: Access to the US frequency group is only available with a software
upgrade from your dealer. Otherwise this feature is disabled.
To change the monitored channel:
1. Per the description in section 3.5.30.8 Setting Operation above, select
TRI.
2. Press the ENT key. TrI appears on the 7-segment display and TRI WX
appears on the dot matrix.
3. Press the SQ UP/DOWN key to toggle between TRI MUL for Multi-
Call and TRI WX for Weather Channel.
4. After selecting the desired operation, press the ENT key.
5. If the setting is acceptable, press the ENT key to confirm. The message
CONT? Y is displayed.
6. Press the ENT key to register the setting.
To exit without making changes, press the SQ UP/DOWN key until DEL?
N is displayed. Press the ENT key and operation returns to the mode
before the Menu operation began.
ENT ENT
To Next Page
Loading...
