36 Ray49E Marine VHF Radio
3. Press in the CH/OK knob on the transceiver or HI/LO key on the microphone
to accept. The sub-menu headings are displayed.
4. Rotate the CH/OK knob on the transceiver or press the CH up/down key on
the microphone to highlight the desired sub-menu.
5. Press CH/OK on the transceiver or the HI/LO key on microphone to accept.
The options under that sub-menu are displayed.
6. Rotate the CH/OK knob on the transceiver or press the CH up/down key on
the microphone to highlight the desired option.
D10251-1
SYS CONFIG
>BACKLIGHT
CONTRAST
KEY BEEP
D10252-1
SYS CONFIG
BACKLIGHT
CONTRAST
>KEY BEEP
D10253-1
KEY BEEP
>LOUD
QUIET
OFF
D10254-1
KEY BEEP
LOUD
>QUIET
OFF
To Next Page
Loading...
