46 Ray49E Marine VHF Radio
Sensitivity
Use this setting to switch the transmit power from high to low. Rotate the CH/OK
knob t o toggle between full receiver sensitivity (Distant mode) and attenuated
receiver sensitivity (Local mode). The LOCAL icon appears while in Local mode
and then is removed in Distant mode.
4.3 GPS/Time Setup
By default, the Ray49E auto-detects NMEA 0183 strings and decodes appropriate
latitude/longitude position and time or COG/SOG. When position data is
available, the “GPS” icon appears on the top line of the LCD. If the GPS navigation
receiver is not connected or is not functional, a manual latitude/longitude
position and UTC time can be entered and used in the DSC distress transmitted
message.
D10268-1
VHF OPS
FREQ BAND
CH NAME
>SENSITIVITY
77
SENSITIVITY
>DISTANT
LOCAL
77
SENSITIVITY
DISTANT
>LOCAL
77
77
FISHING
50 46.1718N
001 17.7189W
AM11:57LOC
MAIN MENU
>VHF OPS
GPS SETUP
ATIS OPS
08
MAIN MENU
VHF OPS
>GPS SETUP
ATIS OPS
08
D10269-1
To Next Page
Loading...
