Raymarine RAY50 - 3.6 System Integration - Ray50

Note:
*MenuitemsnotavailablewhenradiohasATIS
enabledoriftheradiohasbeenpre-programedin
MARCOM-Cmode.
**Themenunameandsub-optionsdependonthe
peripheraldevicesconnectedtotheradio.
Shortcutlist
PressingthePowerbuttononcewhiletheradiois
switchedonwillopentheShortcutslist.TheShortcuts
listcanbeusedtoadjustthebrightness,contrastand
accessfrequentlyusedfunctions.
Shortcuts
Contrast
Channel 06
Add/edit shortcuts
Backlight
Frequentlyusedfunctionscanbeaddedbyselecting
Add/editshortcuts.
AdjustingBrightnessandContrast
TheLCDBrightnessandContrastcanbeadjusted
usingtheShortcutslist.
Fromanyscreen:
1.PressthePowerbutton.
2.SelectBrightnessorContrast.
3.UsetheRotaryknobtoadjusttheBrightnessor
Contrasttothedesiredlevel.
4.PressthePowerbuttonagaintoreturntothe
previousscreen.
Initialstartup
Unlessyourradiohasbeenpre-programmed;therst
timeyoupower-upyourradioyouwillberequestedto
selectcertainoptions.WiththeexceptionofyourMMSI
andATISID,youwillalsoberequestedtoenterthese
optionsafterafactoryreset.
Afteracknowledgingthestartupscreen,unless
previouslysetyouwillbepromptedtomakethe
followingselections:
1.Languageselection
SeeSelectingalanguageforavailablelanguages.
2.TurnonAISreception—Ray70only
Enablesthebuilt-inAISreceiver.Thisstepisonly
applicabletoradioswithabuilt-inAISreceiver.See
SwitchingontheAISreceiverformoreinformation.
3.Selectnetworktype
SelectswhichconnectiontotransmitAISandDSC
informationtoconnectedequipmenton.Thisstep
isonlyapplicableiftheAISreceiverwasturnedon
inthepreviousstep.SeeSelectinganetworktype
foravailableoptions.
4.EnterMMSInumber
RequiredtoenableDSCfunctions.Thisoptionis
notrequiredafterafactoryreset,oriftheradiohas
beenpre-programedinMARCOM-Cmode,orhas
ATISenabled.SeeEnteringanMMSInumberfor
moreinformation.Ifnotalreadyselectedyouwill
alsobepromptedtoselectyournetworktype.
5.EnterATISID
Requiredwhentheradiowillbeusedinthe
inlandwaterwaysofEurope.Thisstepisonly
applicableiftheradiohasbeenpre-programedin
MARCOM-Cmode.SeeEnteringanATISIDfor
moreinformation.
6.Frequencybandselection
Setstherelevantchannelsforyourregion.This
stepisnotapplicableiftheradiohasbeen
pre-programedinMARCOM-Cmode.See
Changingtheradioregionformoreinformation.
Accessingthemenu
Theradio’svariousoptionsandsettingsarecontained
withinthemenu.
D13228-1
FromtheHomescreen.
1.PresstheRotaryknob’sOKpushbutton.
Selectingalanguage
Thelanguagetheradiousescanbechanged.
FromtheMainmenu:
1.SelectSet-up.
2.SelectLanguage.
Thelanguagesavailableare:
•English(default)—English
•Español—Spanish
•Français—French
•Deutsch—German
•Italiano—Italian
3.Selectthelanguagethatyouwanttheradiotobe
setto.
TheUserinterfacelanguageischangedtotheselected
language.
19