46 RC435 and RC435i Chartplotters
➤ To enable or disable SD-GPS mode.
1. Using the trackpad left/right highlight SD-GPS in the function bar.
2. Press ENTER to toggle between SD-GPS ENABLE and SD-GPS OFF.
• Select ON to allow the unit to use SD corrections if available.
• Select OFF to force the unit to calculate a normal GPS fix with no
satellite GPS corrections.
3. Press CLEAR twice to return to the normal display.
➤ To reset SD-GPS.
1. Using the trackpad left/right highlight RESET GPS in the function bar
and press ENTER.
2. Press CLEAR twice to return to the normal display.
D6253-2
SD-GPS
ENABLE
RESET
GPS
To Next Page
Loading...
