Need help?Do you have a question about the Raymarine SmartPilot SPX-30 and is the answer not in the manual?
General| Brand | Raymarine |
|---|---|
| Model | SmartPilot SPX-30 |
| Category | Marine Equipment |
| Language | English |
Describes the manual's purpose, scope, and related products for SPX course computers.
Critical warnings and cautions regarding product installation, operation, safety, and maintenance.
Lists the key activities involved in installing the autopilot system.
Describes the typical components of an inboard autopilot system.
Details how the autopilot connects as part of a SeaTalkng network.
Explains the autopilot connection within a SeaTalk network.
Lists the components included in the SPX core pack.
Identifies additional components needed to complete the autopilot system.
Provides essential advice on cable types, routing, strain relief, and circuit isolation for optimal performance.
Illustrates and labels the connection points for SPX-10 and SPX-30 course computers.
Illustrates and labels the connection points for the SPX-SOL course computer.
Details power and drive cable selection based on drive type, voltage, and length requirements.
Specifies fuse ratings and circuit protection requirements for different drive units and system configurations.
Outlines the recommended grounding requirements for Raymarine equipment, including bonded and RF ground systems.
Explains how to connect the SPX course computer to a SeaTalkng network.
Describes how to connect the SPX course computer using SeaTalk connectors.
Details the NMEA 0183 input/output compatibility and connection for the autopilot.
Guides the connection of the fluxgate compass to the course computer.
Illustrates the connection of the rudder reference sensor to the course computer.
Explains the connection of a sleep switch to disable autopilot operation.
Specifies the necessary conditions for selecting an installation location for the SPX course computer.
Provides a step-by-step procedure for mounting and connecting the SPX course computer.
Outlines essential checks to perform after installation and before commissioning the autopilot system.
States that the product has no user-serviceable components and directs users to authorized dealers.
Provides instructions on how to safely clean the autopilot unit.
Details how to contact Raymarine customer support via web, telephone, and email.
Details the fuse and breaker ratings for power supply and various outputs.
Lists operating and storage temperature limits, humidity, and water protection.
Lists the available data connection protocols like NMEA 0183, SeaTalkng, and SeaTalk.
Lists the NMEA 0183 sentences the autopilot can receive for input.
Lists the NMEA 0183 sentences the autopilot can transmit for output.
Lists SeaTalkng cables and accessories with part numbers and notes.
Lists SeaTalk cables and accessories with part numbers and notes.
To Next Page