Raymarine ST60 Rudder Angle Indicator Instrument User Manual

Preface v
Introduction
Thank you for purchasing a Raymarine product. We are sure your ST60 instrument
will give you many years of trouble-free operation.
This handbook describes how to install and use the Raymarine ST60 Rudder Angle
Indicator instrument. This instrument gives a continuously updated (real time)
display of your vessel’s rudder angle.
The ST60 Rudder Angle Indicator instrument is constructed in a rugged weather
proofed case. It provides a sensitive and stable analog display, to deliver accurate
information under even the most demanding conditions.
Data inputs
The instrument can be used either as a stand-alone unit, or as part of an
integrated SeaTalk instrumentation system.
SeaTalk
When connected to SeaTalk, the ST60 Rudder Angle Indicator can operate as a
repeater to any Raymarine SeaTalk autopilot, or provide rudder position
information to another rudder angle instrument.
SeaTalk enables a number of compatible instruments to be interconnected and
operate as a single, integrated navigational system.
Power and data in a SeaTalk system are fed via a single cable, so that instruments
be connected by plugging them into the network. SeaTalk is flexible enough to
adapt to any number of compatible instruments without requiring a central
D4303-3

Raymarine ST60 Rudder Angle Indicator Instrument Specifications

General

Brand	Raymarine
Model	ST60 Rudder Angle Indicator Instrument
Category	Marine Equipment
Language	English