4 ST6001+ Smartpilot Controller Operating Guide
What does the display tell me?
The SmartPilot display screen provides the following information:
The bar graph at the bottom of the screen indicates the current position of the
rudder, as measured by the rudder position sensor.
Rudder position indicator
Port and Starboard
direction-to-steer
indicators
Autopilot mode
indicators
Distance units:
• no units = kilometres
• nm = nautical miles
• SM = statute miles
Heading indicators
Variable text region (up to 9 characters/digits)
D5457-2
Calibration mode
indicator (displayed on
calibration pages)
To Next Page
Loading...
