12 ST6001+ Smartpilot Controller Operating Guide
.
3. The display automatically returns to the previous mode if you do not
press a key for 10 seconds:
• if you press another mode key within 10 seconds you will select the
mode assigned to that key (for example: auto selects Auto mode,
standby selects Standby mode)
Notes: (1) You can also adjust the lighting level from any other SeaTalk
instrument or control unit.
(2) When you switch off the unit you lose any changes you have
made to the lighting level.
D3313-4
1 second
To Next Page
Loading...
