Raymarine ST6002 - How Do I Return to Hand Steering; How Do I Change Course in Auto Mode

Chapter 1: SmartPilot Operation 5
How do I return to hand steering?
Press standby to disengage the SmartPilot:
•in STANDBY mode, you have manual control of the boat and the display
shows the boat’s current compass heading.
How do I change course in Auto mode?
In Auto mode, use the -1 and -10 (port) and +1 and +10 (starboard) buttons to
change the locked heading in steps of 1° or 10°. For example: press
-10 three
times for a 30° course change to port.
D3560-6
TRUE
D3561-6
TRUE
Port Starboard
or
or
D3320-3
81269_1.book Page 5 Wednesday, November 9, 2005 2:35 PM