Gyro Compass Standard 22 NX
2 Operation
10000000015 12 Edition:001
Fig. 5: Display Page: Heading (OFF)
2.5 Setting Out of Operation
2.5.1 Setting Out of Operation Procedures
Procedure
Note
This procedure must be used if the Standart 22 NX is set out of operation for less than 3
months.
1. Switch off the gyro compass via the distribution board.
2.5.2 Post-Operation Procedures
Procedure
1. If necessary, switch off the GNSS receiver.
2. If necessary, switch off the log.