Razor E200 - Chain and Rear Tire Replacement

Chain and Rear Tire Replacement
Toolsrequired:Phillipsscrewdriver,10mmwrench,two (2)8mmwrenchesandtwo (2)16mmwrenches.
3/%....
I_ _,_4_ / _ ._ _
'1 With a Phillipsscrewdriver,
loosenthetwo screwsand
removethe chainguard.
2 With a lOmmwrench,
loosenthebrakecableanchor
anddisconnectthe cable.
=:, _. !_<,t i_ _ ,_ L_._-_-_ , _, ,,;;;
i , - t F_ i7 " / .... " "
4. With two 16mmwrenches,
loosentheaxle.Slidethewheel
downandremovefromchain
sprocket.Notethesequenceof
thehardware.
5 Installnew chainorwheelby
maneuveringthechainontothe
sprocketandslippingtheaxle
intothe slots ontheframe.
7 Installthebrakespringand
threadthecablewire intothe
cableanchor.Threadthe cable
to its originalpositionand
tightensecurely.
J
13Tightenthe brakehousing
anchorsecurely.Testrideand
check.Readjustas needed.
3 With two 8mmwrenches,
loosenbrakehousinganchor
anddisconnect.Keepthe spacer
andboltstogether.
, /
/'
/ /
//
Tohookupthe brakehousing
anchor,alignthe cableguide
adjusterandinstallthespacer
andbolt. Donottighten until
finalstep.
Replacethechainguard.
Rearwheelhardwaresequence.
17-10,
\
\\\
17-6_
17-5 17-8
RightSide (Throttle)
17-1- Spacer
17-2- Washer(thick)
17-3- Washer(thin)
17-4- Loci<nut
[eft Side (Brake)
17-5- Spacer
17-6- BrakePlate
17-7- Spacer
17-8- Washer(thick)
17-9- Washer(thin)
17-10- Locl<nut
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at
www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00AM - 5:00PM Pacific Time.
6