HEADLINE
5
ASSEMBLY AND SET-UP
5
Attaching the Steering Wheel
Required Tool: 6 mm Allen Wrench (included)
Attaching the Flag
1 Slowly slide the steering wheel tube onto the frame
in the direction of the arrow. Make certain that the tube
is in the “SAFE ZONE” as marked by the line on the
steering wheel tube. Failure to secure the steering wheel
within the safe zone can cause the steering wheel to
come out while riding.
1 Align the flag with the hole in the battery case.
2
Using a 6 mm Allen wrench, tighten the steering bolt to
secure the steering wheel in place.
2
Insert the flag all the way to the bottom of the hole.
110 mm
To Next Page
Loading...
