HEADLINE
8
How to Drive Forward
Press the direction switch to the FWD (forward) position (B). Accelerate with
your right foot by pressing on the throttle pedal (C) to move forward. Brake
with your left foot by pressing on the brake pedal (D). Hold the steering wheel
(E) with both hands, at all times, to control direction and turning.
Note: Keep both hands on the steering wheel and both feet inside the
product when product is in motion.
How to Start
Do not activate (press on) the foot throttle pedal unless you are in the
product and in a safe, outdoor environment suitable for riding.
To start the product, position your body in the seat and place one foot on each
side of the steering wheel. Turn power switch to the ON position (A).
How to Drive In Reverse
While fully stopped, press the direction switch to the REV (reverse) position
(B). Accelerate with your right foot by pressing on the throttle pedal (C) to
move in reverse. Brake with your left foot by pressing on the brake pedal (D).
Hold the steering wheel (E) with both hands, at all times, to control direction
and turning. Make sure you look behind you when riding in reverse. Razor
recommends that you practice driving in reverse in an open area free from
obstructions before riding your product around others.
How to Stop
To stop the product, release the throttle, by lifting your right foot off the
throttle pedal (C), and apply the brake, by pressing on the brake pedal (D),
until the product comes to a complete stop. Razor recommends that you
practice applying the brake at various speeds and in an open area free from
obstructions before riding your product around others. Make sure to press the
power switch to the OFF position after you complete your ride
.
Note: The brake pedal contains a safety switch to cut off power to the motor
when the brake is applied. In an emergency, applying the brake will always
stop the product from moving.
B
A
B
D
D
D
C
C
C
E
E
USAGE
To Next Page
Loading...
Need help?
General
