MI2S-600D/700D/800D 01
Attention:
This manual include important instructions to follow during installation and maintenance of MI2S-800D series
micro inverter. Please read this manual thoroughly before installing or commissioning the device. For safety, the
system must be installed, operated, repaired, and maintained by trained and qualified personnel in accordance with
the requirements described in this document.
Product information is subject to change without prior notice.
It will be modified always ，please refer to our website www.rockcore.com.cn to get the latest vertion.
Security Marks Note：
Note
Indicates a hazard that may cause a fatal electric shock, other serious injury, or fire.
DANGER
Note
To avoid potential safety hazards (including equipment damage and personal WARNING injury), you
must fully understand and follow the instructions.
WARNING
Note
Indicates that this operation is prohibited.The reader should stop the operation and proceed only with
full care and understanding of the operation.
CAUTION
To Next Page
Loading...