RCA 27F501TDV - TV Operation

19
TV operation
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes.
To turn on the TV/VCR/DVD,
press POWER.
Set the TV/CABLE menu
option to the appropriate
position. (See page 22.)
TV - VHF/UHF channels
CABLE - CABLE TV channels
CH 012
Adjust the volume level by
pressing VOL + or – . The
volume level appears.
1
2
3
4
Press the number buttons to
select the channel.
Channels can be instantly
selected by using two buttons.
(for example, to select channel 2,
press “0”, then “2”. If you press
only “2”, channel selection will be
delayed for a few seconds.)
For channels 10 and above,
press the 2 digits in order. For
example, to select channel 36,
press “36”.
You can also press “0”, then the
remaining 2 digits. For example,
to select channel 12, press “012”.
For 3 digit numbers, press the 3
digits in order. For example, to
select channel 120, just press
“120”.
NOTES:
•
•
VOLUME 32
CH 012
5L00101AE(18-21) 2/25/04, 3:07 PM19