RCA 27F501TDV - Changing Angles;Title Selection;DVD Menu

57
1/9
Changing angles / Title selection / DVD menu
When playing back a disc recorded with multi-angle facil-
ity, you can change the view angle.
1
Press ANGLE during play-
back.
The current angle will
appear.
Note :
In case of JPEG-playback,
the JPEG-image is rotated
90 degrees to the right.
2
Press ANGLE repeatedly until the desired angle is selected.
Changing angles
Two or more titles are recorded on some discs. If the title
menu is recorded on the disc, you can select the desired
title.
Press ENTER or 1 (PLAY).
The playback of the selected title will start.
1
Press MAIN MENU during playback.
Title menu appears on the screen.
2
Press / or / to select the desired title.
3
Title selection
Some DVDs allow you to select the disc contents using the
menu.
When you play back these DVDs, you can select the sub-
title language and sound-track language,etc. using the
DVD menu.
DVD menu
NOTES:
• Depending on the DVD, you may not
be able to change the angles even if
multi-angles are recorded on the DVD.
• Depending on the DVD, you may not
be able to select the title. Depending
on the DVD, a “title menu” may simply
be called a “menu” or “title” in the in-
structions supplied with the disc.
1
Press MENU during playback.
The DVD menu appears on the screen.
• Press MENU again to resume playback at the scene
when you pressed MENU.
2
Press / or / to select the desired item.
3
Press ENTER.
The menu continues to another screen. Repeat steps 2
and 3 to set additional items if any.
5L00101AE(53-57) 2/25/04, 3:10 PM57