40
00 : 00 : 00 SP
CH 110
CH 125
INDEX
OTR 0 : 30
3
One-touch Timer Recording (OTR)
Load a cassette tape with the erase
prevention tab intact.
The TV/VCR/DVD will automatically turn
on.
Set the TV/CABLE option to the appropriate position (see
page 22).
1
2
Press SPEED to select the desired tape
speed SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
4
TV - VHF/UHF channels
CABLE -
CABLE TV channels
The One-touch Timer Recording
feature provides a simple and
convenient way to make a timed
recording.
Press the number buttons (0-9) or
CH
+/– to select the channel to be
recorded.
5
NOTES:
• If you wish to watch the DVD playback
during the recording or the OTR, press
DVD to change to DVD mode and
perform the DVD playback.
• The channel cannot be changed
during recording.
Example: One-touch Timer Recording for 30 minutes.
Press REC/OTR. Press the button again to stop recording after
30 minutes. Each additional press of REC/OTR will increase
recording time as shown in the chart below, up to a maximum of
6 hours. The OTR and recording time will appear on the screen
for about 4 seconds.
Press STOP.
"
" will appear on screen for about 4
seconds.
To cancel OTR
Press
once
twice
3 times
4 times
5 times
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
6:00
NORMAL REC
Recording time
Press
6 times
7 times
8 times
9 times
10 times
Recording time
Press TV/VCR to select the TV/VCR mode.
Preparation:
•
5L00101AE(40-42) 2/25/04, 3:09 PM40
To Next Page
Loading...
