RCA ColorTrak 2000 - Page 13

Time Display
• Once set, displays the current
time whenever you turn on the
TV, change channels, or press
the TV button.
• The time is also displayed
whenever you change volume
with the VOLUME buttons on
the TV.
Channel Number
Display
• Shows the number of the
channel you're watching.
• Appears whenever TV or
DISPLAY button is pressed or
channel is changed.
POWER On/Off
• Press once to turn on TV.
• Press again to turn off TV.
Volume Adjustment
• Press VOLUME A to increase
volume.
• Press VOLUME V to
decrease volume.
@Channel Selection and -
(
"4-
Buttons)
• Press + to see next higher
channel in memory.
• Press - to see next lower
channel in memory.
Note: Channels 2 thrn 13 and
91 were programmed into the
channel memory for you at the
factory. Instructions for
adding or erasing channels in
memory are on pages 24-25.
To access video input, see
page 25.
@ VIDEO Adjustments
• Press once to see functions in
Video Menu shown here:
- COLOR */
TINT
CONTRAST
BRIGHTNESS
SHARPNESS
AUTO RESET
• Detailed instructions begin on
page 12.
A UDIO Adjustments
• Press once to see functions in
Audio Menu shown here:
- TREBLE +
BASS
B,LANCE
AUDIO: STERBO
SAP: OFF
SPEAKERS: ON
• Detailed instructions begin on
page 14.
@SETUP Functions
• Press once to see functions in
Setup Menu shown here:
- LEEP TIMER */
PICTURE MEMORY
AUTOPROGRAM
CABLE/AIR: AIR
MESSAGE STYLE
ANTENNA: INPUT B
• Detailed instructions begin on
page 19.
POWER
Light
• Lights whenever TV is turned
on.
• Blinks when alarm is set and
TV is turned off.
STEREO Light
• Ligl]ts. whenever TV is
recelvmg a stereo broadcast
and A UDIO function is set to
STEREO mode. More
information on page 16.
SAP Light
• Lights whenever TV is
receiving SAP (Second Audio
Program). More information
on page 17.
@ SET Light
• Lights whenever the SAP
function is set (on). This
means your TV is ready to
receive a SAP broadcast (such
as a bilingual movie).
Automatic Light Sensor
• Measures the light in the room
and automatically adjusts the
overall picture to match the
room brightness.
Control Sensor
Remote
• Receives commands from the
remote control. When using
the remote control, point it
toward this sensor.
II