S-VHS or Standard VHS Camcorder
S-VHS
Cable
S-Connector
Audio/Video
OUT JACK
An S-VHS or standard camcorder can be connected directly
to your TV.
If you have an S-VHS camcorder, connect the S-VHS video
cable to the S-VIDEO connector on your TV. If you have a
standard VHS Camcorder, connect the video cable to the
INPUT 1 VIDEO jack on the back of your TV. With either
video connection, attach the audio cable to the INPUT l
R/MONO audio jack.
Note: When the Adapter's S-VHS Cable is connected to the
S. VIDEO connector, the Video plug does not have to be
connected. However, you may prefer to plug it in anyway to
keep it out of the way. The S-VIDEO signal will
automatically override the INPUT 1 VIDEO signal.
(Usually Supplied
with Camcorder)
ideo
Operation:
• If the Camcorder is connected to VIDEO 1 jacks as
shown, press TV, then number buttons 9 then 1 to view
whatever the Camcorder is playing.
S-VHS (Super VHS) VCR
S-VHS Cable
Incoming
Cable
IN FROM ANTvfoE O
OUT TO TV Q
Coaxial Antenna Cables =
(such as RCA #AH037)
Shown here is the preferred method of connecting your
S-VHS VCR to your TV.
Connect the S-VIDEO OUT Connector on the back of the
VCR to the S-VIDEO connector on the back of your TV
using art S-VHS cable. Remember to connect the audio
cables from the VCR to the INPUT 1 LEFT and R/MONO
jacks on the back of the TV. The S-VHS cable carries only
video.
Operation:
• If the S-VHS VCR is connected to VIDEO 1 jacks as
shown, press TV, then number buttons 9 then 1 to view
whatever the VCR is playing.
• If you have an S-VHS component connected to the
S-VIDEO and VIDEO 1 jacks, S-VIDEO will appear on
the 'IV when you access the VIDEO I jacks by selecting
Channel 91.
*Optional accessories are available from most RCA dealers and electronic supply stores.
41
To Next Page
Loading...
