EasyManua.ls Logo

RCA DRC69705E30G - Troubleshooting Common Issues; Resolving Power Issues; Remote Control Not Working; Audio and Picture Problems

RCA DRC69705E30G
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 18
No power
• Ensurethecarpoweradaptorisconnected.
• Makesurethattheunitisturnedon.
The remote control does not function
• Makesuretheinfraredremotesensorisnotblocked.
• Makesuretheplasticsheethasbeenremovedfromtheremotecontrol.
• Pointtheremotedirectlyattheinfraredremotesensorontheunit.
• Replacethebatteryintheremotecontrolwithanewone.
No Sound or only a very low-level sound is heard
• Thevolumecontrolislocatedonthesideoftheunit-pleasetryadjustingthis.
• Theunitisinpausemode.Pressthe PLAY button to return to normal play mode.
• Theunitisinfast-forwardorfast-reversemode.Pressthe PLAY button to return to
normal play mode.
• MakesuretheAUDIO/VIDEOoutputconnectionsarecorrect.
• TheDTSDVDcannotbedecodedtohavespeakeroutput.
• Theunitistoohot,shutofftheunitfor30minutestocoolitdown.
No picture
• Theregionnumberofthediscdoesn’tmatchtheregionnumberofthisunit.
The picture is not clear
• Cleanthedisc.
• Thediscisscratched.
• AdjusttheLCD’sbrightnessandcontrastusingtheVIDEOMODEbuttonontheremote
control.
Loud hum or noise is heard
• Theplugsandjacksaredirty.Wipethemwithaclothslightlymoistenedwithalcohol.
• Cleanthedisc.
The disc does not play
• Thereisnodiscinsidetheunit(“NoDisc”appearsonthescreen).
• Insertthedisccorrectlywiththegraphicsfacingup.
• Cleanthedisc.
• A non-NTSC disc has been inserted, or the disc region number does not match the
region number of the unit.
• Condensationmayhaveformedinsidetheunitduetoasuddenchangeintemperature.
Wait about an hour for it to clear and try again.
Troubleshooting

Related product manuals