Using the TV's Features
Channels menu Channels menu
action buttons selection
\
Channels
You can customize the channel listing hy enabling or disahling the display of
cel_ain channels, For instance, you may disable channels that you never watch.
You can restore disabled channels at a later point in time.
1. If the Guide Plus+ system isn't on your screen, press GUIDE on your
renlote control,
2. Press MENU on the remote to select the Menu bar.
3. Use the right and left. arro_xs to highlight the 6haunels menu selection+
4. Use the up and down arrows to select a channel.
Then use the Channels Menu Action Buttons as descrihed next.
Channels Menu Action Buttons
While browsing the Channels menu, the following Action buttons appear:
• Canoe/ Press 1 on the remote to cancel any changes you made since
entering the Channels Menu.
• Cbange Press 2 on the remote to change the channel number for the
highlighted channel line.
On/Off Press 3 on the remote to toggle the state of the channel between
On and Off.
Setup
The Setup menu allows you to access the GUIDE Plus+ system setup information. To access the
Setup option:
1. If the Guide Plus+ system isn't on your screen, press GUIDE on your remote control.
2. Press MENU to select the Menu Bar.
3. Use the right arrow to highlight the Setup menu selection.
4. Use the up and down arrows to select Change system settings, Review options, or
View demo.
• Change system settings Confirms the settings you completed in the GUIDE Plus+
system setup are correct.
• Review option.* Displays the GUIDE Plus+ auto display options.
On Automatically displays the GUIDE Plus+ system when you press the POWER
button on the remote control,
Off Disables the GUIDE Plus+ system from being displayed when you press the
POWER button on the remote control.
• View demo Runs the GUIDE Plus+ system demonstratioa
Note; If you have not completed your GUIDE Plus+ sgsWm setup, these options will *tot be
available. A screen will prompt you to complete your setup.
28 Chapter 2
To Next Page
Loading...
