To Next Page

To Previous Page

Using. Your TV and Remote

With a Cable Box: Setting the Cable Channel

The Cable Channel works with SAT-CABLE button on the remote. If the

Cable Channel is set, pressing SATeCABLE selects the channel to see

cable channels. The Cable Channel setting depends on which channel

your cable box must be on to see cable channels. The channels usually

used are 02, 03, 04, 05 or 06. Consult your cable company for moreinformation.

1. Select the Setup menu

_ontrols Alarm Ad

A. Press"['VtoSettheremote to

controltheTV.

B. PressMENU.PROG toselectthe

Setup menu. This menu is white.

2. Highlight Cable Channel

Alarm

A. Press MOVE • to move down

the menu until Cable Channel

ishish_ghted.

B. Press MOVE I_ to underline

theitem.

3. Enter channel number

Enter the number for your cable

box, either 02, 03, 04, 05, or 06.

Press MOVE • or • until

"Disabled" is displayed to turn

this feature off.

RCA F32632 User Manual

Questions and Answers: