Using, Advanced Features
Naming the Channels
You can name at least 20 channels with four characters in each name.
Full appears beside Label when the memory is used up. Fixed appears
when a channel number cannot be named. Below are the characters
that can be used in a name.
1. Name a channel
Controls Alarm
12
NBC 12
• Alarm
A. Press MENU-PROG repeatedly
to select the Setup menu. This
menu is white.
B. Press MOVE • to highlight
Label.
C. Press MOVE • to underline the
channel number.
D. Select the channel number with
the number buttons.
E. Press MOVE • to underline the
first character of the name.
F. Choose the character using
MOVE • or •.
G. Repeat E-F to complete the
na/Ile.
H. PressMOVE ,i to move
backward if you want to
change an item.
2. Erase a name
12
A. Follow A and B above.
B. Press MOVE • until clear is
underlined.
C. Press MOVE • or • to clear the
nan'te.
Character List
ABC O E FG HIJ KLM N OPQFISTUVWXYZ&I.
' ( )_+, - ......./0 !_=23 78,:9 :;< - > ? ..........@blankspa_ _J
21
To Next Page
Loading...
