Adjusting Your TV
Sound Settings: Stereo, Expanded Stereo, SAP and Tone
Follow these steps to adjust the Stereo, Expanded Stereo, SAP or Tone of
your TV. SAP (Second Audio Program) is sometimes used to offer the
program being watched in another language. The chart below explains
your options.
1. Select the Controls Menu
2. Highlight item to change
Press MENU*PROG to select the
ControLsmenu. This menu is
yellow.
PressMOVE • to highlight the
sound item you want to adjust.
3. Use MOVE • or _1 to
adjust each item
Press MOVE • or < to adjust each
item.
Stereo
SAP
Tone
On
Sound is automatically
reproduced in stereo or
mono, whichever the TV
station is broadcasting.
On
Sound is reproduced in
another sound channel.
If nothing happens,
your broadcast may not
have SAP.
High
High pitched sounds are
louder.
Off Expanded
Sound is reproduced in it• Expanded stereo adds greater
! mono. _l width and dimension to stereo
! I broadcasts creating a more
J spacious stereo sound effect.
•!
off i
Sound is reproduced in 1
Stereo, Expanded Stereo i
or Mono, whichever is i
selected in the Stereo !
Menu Item. i
; Low
I Low pitched sounds are
louder. !
18
To Next Page
Loading...
