Using. Your TV and Remote
•With Audio Equipment: Programming and Basic Operation
Refer to the Connec.tion Book or your Audio equipment owner's manual to hook
up your audio equipment, Your remote controls only RCA audio equipment
such as a radio, CD player, tape player, turntable, or amplifier. The
remote may need to be programmed for your equipment, but may not
operate all models of the brands listed below. Use the codes below or on the
sheet packed in with your remote.
Program the remote for
audio equipment
Basic Operation
Audio Codes-
RCA/Dimensia
aM/FM.............._............03
CD ....................................07
Tape ................................. 06
Phono ............................. .05
Aux ............................,....04
1 0 2 0 3 0
4 0 50 6 0
INPUTo 0 0 ANTENNAo
'_. MOVE
A. Point the remote at the audio
equipment and hold AUDIO.
B. Enter the code from the
code list.
C. ReleaseAUDIO.
D. PressPOWER to turn it on. If
nothing happens, try pressing
AUDIO and then POWER.
E. Repeat A-D with another code
if the first one does not work.
A. Point the remote at the audio
equipment and hold AUDIO.
B. Press POWER to turn it on.
C. Use the buttons on the remote
that relate to audio functions.
Not all buttons highlighted may
• work with your equipment.
D. Turn the audio equipment off
using the audio component's
power off button.
15
To Next Page
Loading...
