10
If You Have Digital Cable without Cable Box or Antenna…
1.
Make sure the power of HDTV
is turned off.
2.
Connect the Coaxial RF cable fro
m your antenna or digital cable to the TV port on the
back of your HDTV.
3.
T
urn on the HDTV.
4.
Follow the fir
st time on screen instructions.
Please Note:
Not all broadcasts
are in High Definition (HD). Please refer to your local
broadcasting stations for more information.
The HDTV’
s tuner is designed for HDTV therefore requires a stronger signal than
normal TVs. If you cannot achieve that signal level with your antenna or cable, your
HDTV might lose picture or sound.
Connection Suggestions
To Next Page
Loading...
Need help?
General
