RCA RLDED3258A-B - OSD Setup and PC Configuration; Time Zone and Daylight Saving; Setup Menu Guide; Zoom Mode and Noise Reduction

20
2. Press “/” butt
on to select “Time Zone” and press the “/” button to enter time zone
adjustment menu to select the local time zone.
3. Press “/” button to select “Daylight Saving Time” and press the “/” button to select
“On” or “Off”.
Note:
The '
Daylight Saving Time
' item is used in DT
V mode only.
SETUP
Press the “MENU” button to enter the OSD m
enu .Then press “/” button to select
the “Setup” menu.
1. Press “”
but
ton to select
“OSD
Language” and
press the
“/” button
to select the
OSD language
which you
desire.
2. Press “/”
button to elect
“Transparency
” and press the
“/” button
to select.
3. Press “/” button to select “Zoom Mode” the “/” button to enter aspect ratio adjustment
menu to adjust aspect ratio.
4. Press “/” button to select “Noise Reduction” and Press “/” button to select.
5. Press “/” button to select “Advanced” and Press “ENTER/” button to enter the
sub-menu. (Only available in PC mode)
A. Press “/”
button to select
“H-POS” and
press the
“/” button
to adjust.
B. Press “/”
button to select
“V-POS” and
press the
“/” button
to adjust.
C. Press “/”
button to select
“Clock” and press the “/” button to adjust.
D. Press “/” button to select “Phase” and press the “/” button to adjust.
E. Press “/” button to select “Auto” menu and press the “” button to auto adjustment.
20