9
appears when you activate the
Attenuate feature.
appears when the batteries are
low.
# appears above the number you
enter.
appears when the scanner tunes
to the delay feature.
appears when you listen to a
channel that is locked out of the
Scan mode.
appears when you manually
select a channel.
appears when you listen to a
frequency stored in monitor
memory.
appears when the priority feature
is on.
appears when you program a
frequency into a channel.
appears when you scan through
the channels.
appears during frequency search.
appears when there is no
specified car number.
appears when deleting all non-
lock-out programmed channels.
appears when you program an
out of range frequency.
appears for 2 seconds when
scanner goes into program
mode. The indicate
the remained channel
numbers.
appears when the scanner
has 200 preprogrammed
channels and the memory is
full.
appears when you delete
only the programmed lock-
out channels.
appears when you specify a
car number and clear the
lock-out mode.
appears when you press
CLEAR during search while
in search mode.
appear to indicate the scan
or search direction.
appears when you listen to
a weather channel.
appears when the keylock
is turned on.
indicates the frequency.
indicates the car numbers.
THE DISPLAY
The display lets you know what your unit is doing. The following is a list of
display messages you will encounter and what they mean.
CARCAR
CARCAR
CAR
ATTATT
ATTATT
ATT
BATTBATT
BATTBATT
BATT
DLYDLY
DLYDLY
DLY
L/OL/O
L/OL/O
L/O
MANMAN
MANMAN
MAN
MEMMEM
MEMMEM
MEM
PRIPRI
PRIPRI
PRI
PROGPROG
PROGPROG
PROG
SCANSCAN
SCANSCAN
SCAN
SRCHSRCH
SRCHSRCH
SRCH
888
To Next Page
Loading...