RCA RP-6198

I
RP-6 I98
Please rutain this
OHNER’S MANUAL ADDENDUM
addendum and Insert inside the front cover of
your owcrw’s manual.
Pags I3 to 14 “Changing Faquency at Channel Memory”
paragraph I m 4 as follows;
I.
2.
3.
4.
5.
4,
.
Press MAN.
Use the number pad to enter the cw number conainlng the
Craquency. II your scanner displays a frequency other than the
one you want ta change ar the same car number, press one of
the search arrows ( 4 or b ) until the frquwq you want to
change Is shown in the display,
Press 0, then press ENT-L/OUT Tha frequency is delatec%
Press PROG.
Enter tie frequmcy m~mbec
Press ENTI UOUr.
Enter car number.
7. Press ENT,UCWC
l PLEASE SEE REVERSE SIDE FOR SUPPLEMENTARY NOTES
TO “USING THE SCANNER” SEmION.
c

RCA RP-6198 Specifications

General

Resolution	4 mil
Interface	USB
Scanning Technology	Laser
Type	Handheld
Power Source	USB powered
Supported Barcodes	UPC-A, UPC-E, EAN-8, EAN-13, Code 39, Code 128, Interleaved 2 of 5, Codabar
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Humidity	5% to 95% (non-condensing)

Summary

RP-6198 Owners Manual Addendum

Changing Frequency at Channel Memory

Instructions for changing frequency at channel memory.

Using the Scanner

Listening to the Weather Band

How to scan and manually tune weather channels.

Using the Attenuator

How to reduce interference with the attenuator feature.

Turning the Key Tone On and Off

Steps to enable or disable the scanner's key tone feedback.

RCA RP-6198 Racing Scanner

FCC Information and Warnings

Cautionary Notes on Scanning

Important warnings about intercepting specific communications and legality.

Introduction to the RCA ScanTrak

Key Scanner Terms

Definitions of essential terms like Signal, Transmission, Frequency, Broadcast, Squelch, Channel, Scan.

First Things First: Powering and Setup

Using Power Adapters

Instructions for using AC and DC power adapters for the scanner.

Installing Batteries

Step-by-step guide on how to install the required AA batteries.

Battery Information and Charging

Charging NiCad Batteries

Procedure for charging nickel-cadmium rechargeable batteries.

Important Battery Precautions

Essential information regarding battery handling, disposal, and potential hazards.

Connecting Antenna and Private Listening

Connecting the Antenna

How to attach the flexible antennas for optimal reception.

Private Listening with Headphones

Instructions for using headphones for private listening via the PHONE jack.

Scanner Features and Safety

Using the Belt Clip and Light

How to use the belt clip and activate the built-in light.

Battery Saver Mode

Explanation of the automatic standby mode to conserve battery power.

Eardrum Safety

Crucial advice on setting volume levels to protect hearing.

Scanner Buttons and Controls

Button Functions Explained

Detailed explanation of each button and its function on the scanner.

Understanding the Scanner Display

Display Message Guide

Comprehensive list and explanation of all display messages and indicators.

Scanner Operation: Volume, Squelch, and Programming

Adjusting Volume and Squelch

Guide to setting optimal audio and noise filtering levels.

Programming Frequencies

Step-by-step instructions for entering new frequencies into the scanner.

Scanner Operation: Band Search

Performing a Band Search

How to search for active frequencies within predefined frequency bands.

Scanner Operation: Scanning and Searching

Scanning Stored Channels

How to scan through programmed channels, including direction control.

Manual Channel Selection

How to manually select specific channels for monitoring.

Managing Channels: Deletion and Modification

Deleting Frequencies and Channels

Procedures for removing specific frequencies or all channels.

Changing Frequency at Channel Memory

How to update an existing frequency entry in a channel.

Advanced Scanner Features: Priority and Monitor Memory

Using Priority Scan

How to set a priority channel for frequent checks.

Monitor Memory Operations

Instructions for storing, listening to, and managing frequencies in monitor memory.

Scanner Operation: Memory, Lockout, and Delay

Storing Monitor Memory to Permanent Channel

How to transfer frequencies from monitor memory to permanent channels.

Locking Out Channels

How to exclude specific channels or car numbers from scanning.

Using Keylock and Delay

How to lock the keypad and activate the transmission delay feature.

Scanner Accessories: Carrying Case

Using the Carrying Case

Instructions for using the carrying case for shoulder or thigh carrying.

Troubleshooting and Initialization

Resetting the Scanner

Steps to perform a soft reset of the scanner to resolve issues.

Initializing the Scanner

Steps for a hard reset, erasing all data and settings.

Equipment Specifications

Care, Maintenance, and Service

Care and Maintenance Guidelines

Recommendations for cleaning, storing, and maintaining the scanner.

Service Information

Information on obtaining professional service and recording purchase details.

Warranty and Support Information

Limited Warranty Details

Information on what the warranty covers, duration, and exclusions.

Customer Support Contact

Contact information for customer service assistance.