VCR makes noise when stopped
• VCR is removing tape from heads. This is normal. The head cylinder inside the VCR will continue to rotate for a few
minutes after you put the VCR in the stop mode.
Will not AUTO CHANNEL SEARCH active channels correctly
• Check to make sure the antenna connections are secure and correct.
• Check to make sure the SIGNAL TYPE: CABLE/ANTENNA feature is set correctly.
• If DETECT AUTOMATICALLY was selected for the SIGNAL TYPE in the AUTO CHANNEL SEARCH menu, select either
CABLE TV or ANTENNA.
Tape plays back in slow motion
• PressPLAYto return to normal playback.
Cannot select channels over 69
• Cablechannelsover 69 can only be selectedif SIGNALTYPE:CABLE/ANTENNAfeature issetto CABLE.
Cassette with safety tab removed does not start to play automatically
• Checkto make surethe AUTO PLAYON/OFFfeature issetto ON.
TIMER indicator flashes
• Clock is not set.
• Check to make sure there is a cassette in the VCR when a timer recording is set.
Time counter disappears during searching
• This isnormal.
On-screen menus appear in English, French, or Spanish
• CheckLANGUAGEfeature.
54
To Next Page
Loading...
