RCF ED1100 - Technical Data; Amplifier Specifications

21
ENGLISH
TECHNICAL DATA
ED 600 ED 1100
OUTPUT POWER [RMS]
STEREO 4 Ω - 2 x 300 W 4 Ω - 2 x 550 W
8 Ω - 2 x 180 W 8 Ω - 2 x 265 W
BRIDGE 8 Ω - 1 x 600 W 8 Ω - 1 x 1100 W
MONO, 1 CHANNEL ONLY 4 Ω - 1 x 310 W 4 Ω - 1 x 570 W
8 Ω - 1 x 195 W 8 Ω - 1 x 325 W
FREQUENCY RESPONSE 20 Hz ÷ 20 kHz (-1 dB) 20 Hz ÷ 20 kHz (-1dB)
20 Hz ÷ 57 kHz (-3 dB) 20 Hz ÷ 57 kHz (-3dB)
DISTORTION (THD+N) < 0.05% @ 1 kHz < 0.05% @ 1 kHz
INTERMODULATION (SMPTE IMD) < 0.03% @ max. power (4 Ω) < 0.03% @ max. power (4 Ω)
DAMPING FACTOR > 200:1 (8 Ω) > 200:1 (8 Ω)
SLEW RATE 50 V / µS 50 V / µS
SIGNAL/NOISE RATIO > 105 dB ”A” weighted > 105 dB ”A” weighted
CROSSTALK > 70 dB @ 1 kHz > 70 dB @ 1 kHz
INPUT SENSITIVITY 0 dBm (0.775 V RMS) 0 dBm (0.775 V RMS)
INPUT IMPEDANCE 20 kΩ balanced 20 kΩ balanced10
kΩ unbalanced 10 kΩ unbalanced
PROTECTION DEVICES Temperature, DC, RFI Temperature, DC, RFI
short circuit, Soft-Start, short circuit, Soft-Start,
thermal on transformer thermal on transformer
INPUT CONNECTORS
PER CHANNEL XLR, 6.3 mm stereo jack XLR, 6.3 mm stereo jack
OUTPUT CONNECTORS
PER CHANNEL 4-way SPEAKON 4-way SPEAKON
COOLING two-speed fan two-speed fan
POWER SUPPLY VOLTAGE 220÷240 V / 110÷120 V 220÷240 V / 110÷120 V
(it depends on the model) 50 / 60 Hz 50 / 60 Hz
DIMENSIONS 88 x 482 x 350 mm 88 x 482 x 350 mm
(390 mm with handles) (390 mm with handles)
RACK UNITS 2U 2U
NET WEIGHT 12.5 kg 15 kg