10
ENGLISH
11
POWER switch
Push to turn ON / off the amplier.
Before switching the amplier on, check all connections and turn fully counterclockwise
(– ) the volume control
4
.
12
Power cord input with fuse.
100-120V~ T 6.3 A L 250V
220-240V~ T 3.15 A L 250V
Before connecting the power cord, check if the mains corresponds to the voltage
indicated on the rating plate on the unit, if not, please contact your RCF dealer.
Connect the power cord only to a mains socket outlet with a protective earthing
connection.
When replacing the fuse, refer to the silk screen indications.
WARNING: the VDE Power Connector is used to disconnect the system from the power
supply network. It shall be easily accessible after the installation and during the use of
the system.
ON
11 12
To Next Page
Loading...
