RCF EVOX 8 User Manual

9
ENGLISH
11
POWER switch
Push to turn ON / off the amplier.
Before switching the amplier on, check all connections and turn fully counterclockwise
(– 󰌨) the volume control
4
.
12
Power cord input with fuse.
100-120V~ T 6.3 A L 250V
220-240V~ T 3.15 A L 250V
Before connecting the power cord, check if the mains corresponds to the voltage
indicated on the rating plate on the unit, if not, please contact your RCF dealer.
Connect the power cord only to a mains socket outlet with a protective earthing
connection.
When replacing the fuse, refer to the silk screen indications.
WARNING: the VDE Power Connector is used to disconnect the system from the power
supply network. It shall be easily accessible after the installation and during the use of
the system.
ON
11 12

RCF EVOX 8 Specifications

General

Max SPL	128 dB
Input Connectors	XLR, Jack
Vertical Coverage Angle	30°
Total Power	1400 W Peak
HF Power	400 W Peak
LF Power	1000 W Peak
Amplifier Class	Class D
Output Connectors	XLR
Protections	Thermal, RMS
Limiter	Soft Limiter
Controls	Volume, EQ
Cabinet Material	Baltic birch plywood
Hardware	Pole mount
Color	Black
Weight	23.8 kg
LF Driver	12", 2.5" voice coil
Input Sensitivity	+4 dBu
Standard Compliance	CE
Woofer	12"
Crossover Frequency	2.2 kHz