RD Instruments WorkHorse User Manual

WorkHorse Mariner ADCP User's Guide
page 10 RD Instruments
A
A
P1 P2
View A - A
J1 Wire Side
Sca
l
e
: N
o
n
e
P1
P2
6
5
2
1
4
3
7
BRN
BLU
WHT
BLK
GRN
RED
YEL
L
W
M
X
N
E
G
ADCP_TXDB1 (RS-232 OUT/CH A RS-485B/RS-422 OUT B (-))
ADCP_TXDA1 (RS-232 IN/CH A RS-485A/RS-422 OUT A (+))
ADCP_RXDA1 (CH B RS-485 A/RS-422 IN A (+))
ADCP_RXDB1 (CH B RS-485 B/RS-422 IN B (-))
ADCP_DATACOM (COMMUNICATION RETURN)
ADCP +VDC (POWER +)
ADCP -VDC (POWER -)
Figure 7. I/O Cable Overview
3.5 Optional Flash Memory Card
Memory cards are not included with the Mariner ADCP. Two PCMCIA
memory card slots (see Figure 5, page 8) are available, with the total mem-
ory capacity not to exceed 2GB. The PC Card recorder is located on the
Digital Signal Processor (DSP) board inside the Workhorse’s electronics.
To recover data, the card can be removed and used in a personal computer
(PC), or left in the Workhorse, and accessed by using WinSC (see the
WinSC and PlanADCP User's Guide).
NOTE. The WorkHorse Mariner does not come with flash memory, but
has the same capacity as a WorkHorse Sentinel.
NOTE. WinSC is not provided with WorkHorse Mariner systems, but is
available for free download at www.rdinstruments.com
.

RD Instruments WorkHorse Specifications

General

Brand	RD Instruments
Model	WorkHorse
Category	Measuring Instruments
Language	English