Re S.p.A. WG251 SKB-C RESMART
22/11/12 12/25
FUNCTIONS MENU WINDOW (ORANGE): this window is used to access the functions and set
the operating parameters, perform the calibration and reset the system.
HOW TO ACCESS THE FUNCTIONS MENU WINDOW
Press the enter key for a few seconds to switch between the operating window and the
functions menu window .
F.1
The display will show the last function set .
WHAT TO DO
Press the + or – keys to scroll the functions of the menu, to find the desired function (the
number of the function is displayed in white, whilst its value is in orange).
Press the write key to access the value of the function (the value of the function turns
white, whilst the number of the function turns orange).
Press the + or – keys to increase or decrease the value of the function, to find the
desired value.
Press the write key to confirm the value set on the function and go back to the functions
menu (the value of the function turns orange, whilst the number of the function turns
white).
To exit the functions menu window press the enter key for a few seconds, to memorise
all the parameters changed.
Attention!
After about a minute of inactivity the functions menu window is disabled
automatically .
Value of the selected function
Disables the functions
menu window
Enables/disables the
change to the function
value
Change the function and
its value
Selected function
Associates the key to
the selected function
Selects the manual status
Selects the automatic status
To Next Page
Loading...
Need help?
General
