Reach PoE4N Tester Manual 1.4 08/09/2017 Page 6
2.3. Features
IEEE signature options: nominal, high, and over-spec capacitive.
Classification 0 through 4 (all nominal).
Passes GbE traffic from each test port to the neighboring port isolated from PD load (1-2,
3-4, etc).
Relay data path for compatibility with Phy-based cable diagnostics.
Low cost compared to compliance-level PD emulators.
Universal voltage (110/220) power supply.
Serial RS232 console control.
2.4. Dimensions
The unit fits in a standard 19" rack using screw-on ears.
Case outside dimensions are:
16.665" deep
17.30" wide (fits 19” rack; mounting ears provided)
1.74" high
2.5. Electrical Characteristics
The RT-PoE4N is powered via a locking power DIN 4 pin connector and requires 12V
DC at a maximum of 8.5 Amps.
The unit is supplied with a worldwide universal AC input power supply brick. Its
characteristics are:
85-264VAC input, 87.5% efficient, 0 to 40C operation, IEC320/C14 input
2.6. Environmental
Operating temperature range is 0C to 40C. Storage is -30C to 70C.
Humidity is 85% maximum, non-condensing
2.7. Warranty
The RT-PoE4N is warranted by Reach Technology against manufacturing defects for one
year.
2.8. Operating Software
No Software license is required.
2.9. Calibration
The unit performs self-calibration on power-on, or on command.
To Next Page
Loading...