Realistic TRC-422A - Safety Warnings and Service; Transceiver Inoperability Checks; Safety Precautions and Servicing

2. If trouble is experienced with transmitting:
® Check if the transmission line is securely connected to the ANTenna
Connector.
® Check if the antenna is correctly installed for proper operation.
@ Are all transmission line connections secure and free of corrosion?
@ Make sure you are fully pressing the Push-To-Talk Button on the
Mic.
® Be sure Mic connector is firmly pressed into its jack.
® Check setting of PA-CB-MON switch.
3. If the Transceiver is completely inoperative:
@® Check the power cable and in line fuse.
Replace only with an identical 2 amp fuse.
If these checks don’t solve the trouble, do NOT attempt repairs or
adjustments yourself. The unit should be serviced only by a qualified
radio technician. Whenever possible, return the unit to the store from
which it was purchased.
WARNING
Do not open up the Transceiver to make any internal adjustments.
Any internal adjustments can be made only by (or under the direct
supervision of) a person holding an FCC 1st or 2nd Class Radio Operator's
License.
Internal adjustments and/or modifications can lead to illegal operation as
defined by FCC Rules and Regulations, Part 95. Such illegal operation
can lead to very serious consequences.
TO BE SAFE AND SURE:
1. You should never open up the case of your Transceiver.
2. Never change or replace anything in your Transceiver.
ae [> ewe