16
COAXIAL OPERATION
1. Connect the COAXIAL OUT jack from the external audio player (such as TV,
DVD player etc.) to the COAX jack on the rear of the unit.
Connection is illustated below:(For PCM format only)
2. Connect the Digital Coaxial Audio cable to the optical output on the audio
source and to the Coaxial Input on the soundbar.
3. Press the POWER button on the unit or the remote control to switch on
the unit.
4. Press the OPT/COAX button on the remote control twice or press the M
Press the OPT/COAX button on the remote control ONCE to switch to
OPT function. Press this button TWICE to switch to COAX function.
Press this button repeatedly to switch to OPT or COAX mode.
NOTE:
button on the unit repeatedly until the LED 4 and 5 lighting blue to switch to
coaxial mode.
5. Using the native controls on your connected device, make sure the audio
settings are set to PCM or Coaxial Audio and are turned On. Audio from
the connected audio source will now be played through the speakers.
OPT
COAX
ARC
USB
AUX
POWER
SUB
DC IN
L
R
TV
COAXIAL
REAR PANEL
To Next Page
Loading...