Realme RMV2002 - Bluetooth Operation

11
BLUETOOTH OPERATION
1. Pairing a Bluetooth Device for the first time.
>ll
>l
l<
2. Press the POWER button on the unit or the remote control to switch on
the unit.
3. Press the BT button on the remote control or press the M button on the
unit repeatedly until the LED 1 blinking blue to switch to bluetooth mode.
4. Using the native controls on your Bluetooth device, select the
“realme soundbar” in your Bluetooth settings to pair and try to connect.
5. When successfully paired and connected, a beep will issue from the unit.
After initial pairing, the unit will stay paired unless unpaired manually.
6. If your device should become unpaired or it is unable to connect, repeat the
above steps.
After successful paired, the LED 1 indicator will be solid blue.
7.During playing:
Press the or button on remote control to skip tracks.
Press the button on remote control to pause, press it again to resume.
Or Press the button on the unit to pause, press it again to resume.
Or press the - or + button on the unit to skip tracks.
Note:
The unit will be automatically connected with the last connected Bluetooth
device if their Bluetooth function are activated and they are in working range.
8. If you want to disconnect the current connection, press and hold the button
on the unit or press and hold the BT button on remote control for about 2
seconds to disconnect.