The phone will try to connect to a nearby reader for about 10 seconds. Two things can happens.
1/ The phone finds a reader and connects. In this case, the blue "LED" of the reader changes from flashing to
constant. The phone screen shows "Disconnect".
2/ The blue led of the reader is flashing. After ten seconds of searching, the phone has not found a
reader. In this case, two possibilities:
a) the following message will appear:
Try again!
If a connection has not been established, a reason may be:
- Failure when turning on the reader,
- Failure to charge the reader's battery,
- Wrong setting of your phone's Bluetooth (see the manual of your phone),
To Next Page
Loading...